1.13.021.605 12 V DC 4000 rpm 0.11 A Bühler Motor
Click image for Gallery
Design
Commutator Copper/7-segments
RFI Protection 2 chokes (not 1.13.021.701)
Insulation class Winding H,
otherwise A Protection class IP40
Commutation carbon brushes
Armature straight slot Magnet system Permanent magnets, 2-pole
Bearings 2 sintered bronze bearings,
drive end with ball bearing on model 1.13.021.605/606
Housing Steel, corrosion protected
End shields brush end plastic drive end zinc die-cast
Encoder possible
The following modifications are available upon request,
Internal chokes and/or capacitors
Speed adjustment by winding change
Addition of wire harnesses
Modification of shaft length on both ends
Modification of shaft configuration (flat, groove, etc.)
Assembly of gears, pinions, worms, etc.
Assembly of adapters and mounting plates