DM805-Al Giriş ;80V DC 7A 2Faz Dijital Step Sürücü
ÖZELLİKLER;
Features
- Advanced 32-bit DSP digital stepper drive with built-in speed controller
- Input command of step & direction to function as a traditional 2-phase stepper drive
- Input command of 0-5 VDC analog command for speed control
- Built-in potentiometers for speed, acceleration and deceleration
- Built-in 5V output for an analog control and testing
- Preset acceleration/deceleration and adjust by built-in potentiometers
- Limit signal input for safe operation
- Input voltage of 20-80 VDC
- Output current of 2.7-7.0 A via DIP switches, or 0.5-7.0A via software
- Micro steps of full/half/8/64, or full-512 steps via software
- Anti-Resonance, provides optimum torque and nulls mid-range instability
- Motor auto identification and drive parameter auto-setup technology to offers easy setup and optimum responses with different 2-phase stepper motors
Specification
| Model: | DM805-AI |
| Phase: | 2 |
| Control Mode: | Step & Direction Velocity (Oscillator) |
| Max Input Frequency: | 200KHz |
| Input Voltage Range: | 20 - 80 VDC |
| Suggested Power Supply Voltage Range: | 24-72 VDC |
| Software Cofig. Resolution Range: | 200 - 102,400 (increased by 200) |
| # of DIP Switch Resolution Configurations: | 4 |
| DIP Switch Resolution Setings: | 200, 400, 1600, 12800 |
| Software Cofig Current Range: | 0.5 - 7.00 A (increased by 0.1 A) |
| # of DIP Switch Current Configurations: | 7 |
| DIP Switch Current Configurations: | 2.6A, 3.4A, 4.0A, 4.8A, 5.4A, 6.1A, 7.0A |
| Logic Current Range: | 7-16mA (10mA typical) |
| Logic Voltage Range: | 4-5 VDC for pulse active high (default) , or 0-0.5V for pulse active low |
| Communication Type: | RS232 |
| Pulse enabled at: | Rising edge |
| Idle Current Percentage: | 50 % |
| Software Config. Idle Current Percentage: | 0-100% |
| # of Digital Inputs: | 3 |
| Step Width: | 2,500 ns |
| Minimal Direction Setup Time: | 5,000 ns |
| Protection: | Over-current, over-voltage, and stall |
| Isolation Resistance: | 500M Ohm |
| Environment: | Avoid dust, oil fog and corrosive gases |
| Ambient Temporature: | 0-50°C |
| Humidity: | 40–95% RH |
| Operating Temporature: | 0-70°C |
| Vibration: | 5.9 m/s2 Max |
| Storage Temporature: | -20-65°C |
| Specification: | 4.65 X 2.97 X 1.34 Inches |
| Weight: | 0.63 lb |