CS1-D507S 20-50V dc 7A 500kHz Leadshine Step 2 Fazlı Geliştirilmiş Kapalı Döngü Kademeli Sürücü

CS1-D507S 20-50V dc 7A 500kHz Leadshine Step 2 Fazlı Geliştirilmiş Kapalı Döngü Kademeli Sürücü
Click image for Gallery
  • Ürün Kodu: CS1-D507S
  • Stok Durumu: Stokta var
  • $0,00
  • Vergiler Hariç: $0,00
- +


Features

  • 20-50VDC supply voltage, max 7A output current
  • No loss of step, No hunting, No torque reservation, No tuning
  • Step & direction or CW/CCW control modes
  • Enhance performance at low speed application( 30-120 RPM)
  • Max 500 KHz input frequency
  • Brake output without connecting a relay
  • Encoder A/B/Z outputs
  • Switch Setting: Microstep, Direction, Pulse Mode, Positional command filter, Encoder resolution, Gain adjustment and output current, 5V / 24V logical voltage selector
  • CE certified and RoHS complian
  • Model: CS1-D507S
    Phase: 2
    Control Mode: Step & Direction, CW & CCW
    Max Input Frequency: 500 KHz
    Input Voltage Range: 20 - 50 VDC
    Suggested Power Supply Voltage Range: 24 - 48 VDC
    Software Cofig. Microstep Range: 200 - 512,000 (increased by 200)
    # of DIP Switch Microstep Configurations: 16
    DIP Switch Microstep Settings: 400, 1000, 1600, 2000, 3200, 3600, 4000, 5000, 6400, 8000, 10000, 20000, 25000, 36000, 40000, 50000
    Software Cofig. Current Range: 0.5 - 7.0 A (increased by 0.1 A)
    DIP Switch Functions: Microstep, motor direction, auto-tuning, pulse mode, open/closed loop selection, filter time, encoder resolution, 5 / 24V logic voltage selection
    Encoder Resolution: 1000 ppr, 2000 ppr, 2500 ppr, 2500 ppr, 5000 ppr
    Logic Current Range: 7 - 16 mA (10mA typical)
    Logic Voltage range: 0-0.5 VDC for pulse active low, or 4.5-5 VDC (or 23-24 VDC optional) for pulse active high
    Communication Type: RS232 for tuning
    Pulse enabled at: Falling edge
    Idle Current Percentage: 50% or 90%
    Software Config. Idle Current Percentage: 0 - 100%
    # of Digital Inputs: 3
    Digital Outputs: Fault outout; brake control; in-position output; encoder A±/B±/Z± outputs
    Step Width: 1,000 ns
    Minimal Direction Setup Time: 2,000 ns
    Protection: Over current; over voltage; chip error; motor cable error; ROM error; auto-tuning error; position following error;
    Isolation Resistance: 500 Mohm
    Environment: Avoid dust, oil fog and corrosive gases
    Operating Temperature: 0 - 50 °C
    Humidity: 40 - 95% RH
    Vibration: 5.9 m/s2 Max
    Storage Temperature: -20 - 65°C
    Mechanical: 118 * 79.5 * 25.5 mm
    Weight: 280g

Yorum Yap

Not: HTML'e dönüştürülmez!
    Kötü           İyi